전체상품목록 바로가기

본문 바로가기

현재 위치
  1. GNSS System
(해외배송 가능상품)
공급사 바로가기
기본 정보
상품명 [MARVELMIND] Indoor GPS Starter Set Super-MP-3D 915 MHz
상품코드 P0000ILH
판매가 1,330,000원
수량 수량증가수량감소
정기결제
구매방법
배송주기

정기배송 할인 save

  • 결제 시 : 할인

개인결제창을 통한 결제 시 네이버 마일리지 적립 및 사용이 가능합니다.

>상품 옵션
옵션선택
수량
증가 감소

(최소주문수량 1개 이상 / 최대주문수량 0개 이하)

사이즈 가이드

수량을 선택해주세요.

위 옵션선택 박스를 선택하시면 아래에 상품이 추가됩니다.

상품 목록
상품명 상품수 가격
[MARVELMIND] Indoor GPS Starter Set Super-MP-3D 915 MHz 수량증가 수량감소 1330000 (  )
옵션 정보
총 상품금액(수량) : 0 (0개)

할인가가 적용된 최종 결제예정금액은 주문 시 확인할 수 있습니다.

이벤트

[ Detail ]

[MARVELMIND] Starter Set Super-MP-3D
악세사리 차콜 색상 이미지-S1L3
  Description

The Starter Set Super-MP-3D is designed for precise indoor positioning and navigation system. It can be used for autonomous navigation of mobile robots, vehicles and drones; for industrial applications, 
for example, forklifts or people tracking in a warehouse for safety and productivity.
The set is particularly good for production automation, warehouse automation, safety and productivity for people 
and vehicle tracking; building geo-fencing zone and tracking inside them.

The starter set is a multi-purpose (MP) set based on Super-Beacons. Particular focus of the set is on accuracy of positioning. 
The set can provide typical accuracy of ±2cm even before additional sensor fusion or filtering. 
This level of accuracy is about 10 times higher than what ultra-wide band (UWB) provides and about 100 times higher than 
it can be provided by BLE (iBeacon) based systems.

Starter Set Super-MP is the most versatile (see supported architectures below) and the easiest to set up and deploy 
(no need for manual distances measurement or calibration) set available today (Feb. 2022).

By default, the Starter Set Super-MP-3D supports NIA and IA (https://marvelmind.com/pics/architectures_comparison.pdf):

   -1D – up to 4 mobile beacons
   -2D – up to 4 submaps, including fully overlapping submaps and 2N beacon redundancy for optimal tracking
   -3D – up to 1 submap with N+1 beacon redundancy
With additional licenses Starter Set Super-MP-3D can support:

   -Multi-Frequency (MF) NIA in 3D with N+1 beacon redundancy
   -Multi-Frequency (MF) NIA in 2D with N+1 beacon redundancy
   -MMSW0004: MF NIA support
  Content:

   -4 x Stationary Super-Beacons ( with different ultrasound frequencies)
   -1 x Mobile Super-Beacon (identical to the stationary Super-Beacons, but, typically, on another ultrasound frequency)
   -1 x Modem HW v5.1 supporting up to 250 beacons

Notice that in order to support IA and MF NIA (see more about different architectures), stationary Super-Beacons must be 
on different frequencies. 
Typically, we supply 5 different frequencies. Sometimes – 4 different frequencies, when there is a shortage of one or more frequencies.
Even 4 different frequencies do not limit users in any way, because one of the Super-Beacons must be mobile. In this case,
 it doesn’t matter what transducers it has – on which frequency – because it will be receiving the ultrasound. 
And Super-Beacons can eceive any frequency, because the frequency is chosen based on the digital filter. 
But the transmitting frequency is defined by the properties of the transducer and cannot be changed.

We equip the sets with beacons with different frequencies from the list of available ones: 19kHz, 22kHz, 25kHz, 28kHz, 31kHz, 34kHz, 37kHz, 45kHz. Unless you specifically request some frequencies, we will select them based on our preferences.

All beacons (stationary and mobile) are equipped with with 6D IMU (3D accelerometer + 3D gyroscope) and standard 50mm antennas. Effectively, you are getting 5 similar Super-Beacons albeit on different ultrasonic frequencies and a modem. 
The HW of the system supports two bands:

   1. License-free ISM band (915 MHz) for the US and countries in Region 2 (https://en.wikipedia.org/wiki/ITU_Region)
   2. License-free SRD band (868 MHz) for the EU and other countries: (https://en.wikipedia.org/wiki/Short-range_device#SRD860)
We always recommend to check your country’s local regulations.

The Multi-Frequency NIA allows having up to 8 times update rate increase for multiple mobile beacons without location update rate reduction inherent to regular NIA with multiple mobile beacon (“hedges”) – 8 different ultrasound frequencies are available totally. Check more about different architectures: Architectures comparison.

All essential SW as well as Marvelmind Dashboard API are already included in the price. Just download the Marvelmind SW pack: https://marvelmind.com/download/ => https://marvelmind.com/pics/marvelmind_SW.zip.

Super-Beacons are a newer version of Beacons HW v4.9 and superior to them in nearly all aspects:

    -Super-Beacons have sharp DSP filters (the same valid for Mini-RXs or Industrial-RXs). The Super-Beacons are more sensitive and          more interference resistant than Beacons HW v4.9 that rely on analogue filters 
    -Super-Beacons have improved TX part and power-saving features that allows up to 10x battery lifetime improvement over               Beacons HW v4.9 (depending on the settings and update rate)
    -Super-Beacons as well as Mini-RX and Industrial-RX use a single wide-beam microphone for receiving ultrasound, thus making         submaps in complex conditions (larger distances, for example, or noisy environment) much easier to build, than that with                 Beacons HW v4.9, because the microphone is always on and it has a wide reception diagram. Whereas, with Beacons HW v4.9 in       those challenging conditions, one would need to turn off some sensors and, generally speaking, take care about the number of         sensors (RX1-RX5) turned on in order to provide proper coverage, on the one hand, and to maintain the right sensitivity on the         other
    -All Super-Beacons have 6D IMU (3D accelerometer and 3D gyroscope)
Super-Beacons are better than Mini-RXs and Mini-TXs as well:

Super-Beacons are dual-use: they can both receive and transmit ultrasound. You can absolutely freely use them as stationary and as mobile
   -Super-Beacons have external pins (UART, SPI, reset, etc.)
   -Super-Beacons have external antenna for longer radio range and larger maps
   -Super-Beacons have internal batteries with higher capacity
 Marvelmind Indoor Navigation System is off-the-shelf indoor navigation system designed to provide precise (±2cm) location data
 to autonomous robots, vehicles (AGV), and copters. 
It can also be used to track other objects with a mobile beacon installed on them, for example, forklifts in warehouses or virtual reality (VR) helmets or helmets for construction workers or miners, etc.

The navigation system is based on stationary ultrasonic beacons united by radio interface in a license-free band (915/868 MHz ).
The location of a mobile beacon is calculated based on the propagation delay of an ultrasonic signal (Time-Of-Flight or TOF) 
to a set of stationary ultrasonic beacons using trilateration.

No manual calibration is required. No need to know exact locations of the beacons – the system builds the map of beacons automatically.

The set contains beacons with IMU and that gives a possibility for ultrasonic + IMU (3D accelerometer + 3D gyro) sensor fusion.
That allows much faster update rate – up to 100Hz and above.

The key requirements for the proper system functionality:

   -For 3D (X, Y, Z) tracking – An unobstructed sight by a mobile beacon of three or more stationary beacons simultaneously within        30 meters
   -For 2D (X, Y) tracking – An unobstructed sight by a mobile beacon of two stationary or more stationary beacons simultaneously        within 30 meters
   -In ideal (noiseless) conditions and with lower frequencies, the maximum distance can be up to 50 meters – not recommended,          but possible
   -All Super-Beacons have 6D IMU onboard
   -See more about the line of sight requirement
   Technical Details
악세사리 상품 이미지-S1L10
악세사리 화이트 색상 이미지-S1L11
악세사리 상품 이미지-S1L12
악세사리 차콜 색상 이미지-S1L13
악세사리 차콜 색상 이미지-S1L14

[ Payment Info ]

고액결제의 경우 안전을 위해 카드사에서 확인 전화를 드릴 수도 있습니다.
확인과정에서 도난 카드의 사용이나 타인 명의의 주문등 정상적인 주문이 아니라고 판단될 경우 임의로 주문을 보류 또는 취소할 수 있습니다.  

무통장 입금은 상품 구매 대금은 PC뱅킹, 인터넷뱅킹, 텔레뱅킹 혹은 가까운 은행에서 직접 입금하시면 됩니다.  
주문시 입력한 입금자명과 실제입금자의 성명이 반드시 일치하여야 하며, 7일 이내로 입금을 하셔야 하며 입금되지 않은 주문은 자동취소 됩니다.

[ Shipping Info ]

  • 배송 방법 : 택배
  • 배송 지역 : 전국지역
  • 배송 비용 : 72,500원
  • 배송 기간 : 1일 ~ 3일
  • 배송 안내 : 배송업체 :  로젠택배 (대표번호 : 1588-9988 (https://www.ilogen.com/web)

    상품 출고 후 배송문의는 배송업체에 연락하시면 빠르게 안내 받으실 수 있습니다

    - 제주지역 및 도서 산간지역은 배송비 3500원이 추가로 부가되며 지역에 따라 추가 요금이 더 발생 할 수 있습니다.
    - 오후 3시 이전 결제완료 된 주문 건에 한해 당일 출고가 되며, 이후 주문건은 다음날 출고 됩니다.
    - 상품은 출고 후 1~2일 이내로 받으 실 수 있으나 물량 및 택배사 배송사정으로 인해 다소 지연될 수 있으니 양해 바랍니다

[ Service Info ]

DRONEWE 고객센터 안내
평일 10:00~17:00 13:00~17:00
토,일요일 공휴일 휴무
TEL 070-7865-8122
FAX 031-624-4930
E-MAIL help@accesswe.co.kr
택배 마감 오후 3시

[ Exchange Info ]

A/S 안내

                    



  • 억세스위에서 구매하신 제품들은 출고 시 초기 불량을 제외한 제품 교환을 불가능하며모든 상품은 공급사의 A/S 처리 방침에 따르며 유상 수리로 처리 됩니다.
  • 해외 공급사로 제품을 배송하고 수리 후 배송 받기 때문에 처리 기간이 1개월 이상 소요 됩니다.
  • 수리를 진행하는데 부품 공급이 원활하지 않은 경우 A/S 기간이 다소 늘어날 수 있습니다. 이점 양지 하시길 바랍니다.
  • A/S를 의뢰 하실 때는 고장 증상을 정리한 문서와 사진, 동영상, 로그 파일 등이 필요합니다.
  • 제품이 아닌 소모품의 경우 수리 대상이 될 수 없습니다.
  • 침수, 파손, 변형 된 제품은 수리가 불가능합니다.




교환 및 반품정보

                                    


교환 및 반품이 가능한 경우
  • 상품공급 받으신 날로부터 7일 이내(단, 포장을 개봉하였거나 포장이 훼손되어 상품 가치가 상실된 경우에는 교환/반품이 불가능합니다.)
  • 교환 및 반품시 주소 : 경기도 수원시 권선구 산업로195-58 왼쪽 신관 2층
  • 고객님의 단순 변심에 의한 교환, 반품을 하실 경우 상품 반송 비용은 고객님께서 부담하셔야 합니다. (색상 교환 및 기타)

교환 및 반품이 불가능한 경우
  • 시간의 경과에 의하여 재판매가 곤란할 정도로 상품 등의 가치가 현저히 감소한 경우
  • 고객님의 사용 또는 일부 소비에 의하여 재판매가 곤란할 정도로 가치가 감소한 경우 (소비자보호법 17조2항 참조)
  • 복제가 가능한 상품 등의 포장을 훼손한 경우(자세한 내용은 e-mail 상담을 이용해 주시기 바랍니다.)
    * 구매 후 조종 미숙 또는 비행이 부적합한 환경에서의 무리한 비행으로 발생하는 문제에 대해서는 판매자의 책임이 없음을 알려드립니다.



환불정보

                  


  • 환불시 반품된 제품을 확인한 후 3영업일 이내에 결제 금액을 환불해 드립니다.
  • 신용카드로 결제하신 경우에는 신용카드 승인을 취소하여 환불을 진행합니다.
    (단, 신용카드 결제일자에 맞추어 대금이 청구 된 경우 익월 신용카드 대금청구시 카드사에서 환급처리 됩니다.) 

[ Review ]

게시물이 없습니다

상품후기쓰기 모두 보기

[ Q&A ]

게시물이 없습니다

상품문의하기 모두 보기